Simulation experiments of the effect of space environment on bacteriophage and DNA thin films.

The main goal of PUR experiment (phage and uracil response) is to examine and quantify the effect of specific space conditions on nucleic acid models. To achieve this an improved method was elaborated for the preparation of DNA and bacteriophage thin films. The homogeneity of the films was controlled by UV spectroscopy and microscopy. To provide experimental evidence for the hypothesis that interplanetary transfer of the genetic material is possible, phage T7 and isolated T7 DNA thin films have been exposed to selected space conditions: intense UVC radiation (lambda=254 nm) and high vacuum (10(-4) Pa). The effects of DNA hydration, conformation and packing on UV radiation damage were examined. Characteristic changes in the absorption spectrum, in the electrophoretic pattern of DNA and the decrease of the amount of PCR products have been detected indicating the photodamage of isolated and intraphage DNA.     

Properties and performance of extended target motion analysis

The problem of target motion analysis (TMA) has been the subject of an important literature. However, present methods use data estimated by a short time analysis (azimuths, Dopplers, etc.). For far sources, the nonstationarities of the array processing outputs, induced by the sources motion, may be simply modeled. This model leads one to consider directly a spatio-temporal TMA. Then new (spatio-temporal) data can be estimated. These estimates correspond to a long time analysis. Further, note that they are estimated independently of the (classical) bearings. In this general framework, the concept of source trajectory replaces the classical instantaneous bearings. Corresponding TMA algorithms are then studied. Then the study of statistical performance is carefully studied     

Sequence comparison techniques for multisensor data fusion andtarget recognition

A new class of techniques for multisensor fusion and target recognition is proposed using sequence comparison by dynamic programming and multiple model estimation. The objective is to fuse information on the kinematic state and “nonkinematic” signature of unclassified targets, assessing the joint likelihood of all observed events for recognition. Relationships are shown to previous efforts in pattern recognition and state estimation. This research applies “classical” speech processing-related and other sequence comparison methods to moving target recognition, extends the efforts of previous researchers through improved fusion with kinematic information, relates the proposed techniques to Bayesian theory, and applies parameter identification methods to target recognition for improved understanding of the subject in general. The proposed techniques are evaluated and compared with existing approaches using the method of generalized ambiguity functions, which lends to a form of Cramer-Rao lower bound for target recognition     

Enzyme conversion of lignocellulosic plant materials for resource recovery in a Controlled Ecological Life Support System.

A large amount of inedible plant material composed primarily of the carbohydrate materials cellulose, hemicellulose, and lignin is generated as a result of plant growth in a Controlled Ecological Life-Support System (CELSS). Cellulose is a linear homopolymer of glucose, which when properly processed will yield glucose, a valuable sugar because it can be added directly to human diets. Hemicellulose is a heteropolymer of hexoses and pentoses that can be treated to give a sugar mixture that is potentially a valuable fermentable carbon source. Such fermentations yield desirable supplements to the edible products from hydroponically-grown plants such as rapeseed, soybean, cowpea, or rice. Lignin is a three-dimensionally branched aromatic polymer, composed of phenyl propane units, which is susceptible to bioconversion through the growth of the white rot fungus, Pluerotus ostreatus. Processing conditions, that include both a hot water pretreatment and fungal growth and that lead to the facile conversion of plant polysaccharides to glucose, are presented.     

Practical stabilization in attitude thruster control

The attitude stabilization of a spacecraft using thrusters is considered from a practical point of view, i.e., when actuator constraints, uncertainties and failures, measurement noise, fuel consumption, and inertia matrix uncertainty are considered. A variable structure controller based on sliding modes is obtained first, which guarantees global exponential stability under actuator constraints, uncertainties, and failures. The design is based on a continuous average-proportional torque selection function and a set of feasible sliding surfaces, which may be adapted to improve performance. Exponential convergence towards ultimate bounds is guaranteed when all other practical issues arise.     

Design and implementation of near-field, wideband synthetic aperture beamformers

A coarray-based near-field, wideband synthetic aperture beamformer using stepped-frequency signal synthesis and post-data acquisition processing is presented. While coarray techniques offer significant reduction in the number of array elements for a given angular resolution, the hybrid subarray-stepped frequency realization of wideband systems simplifies implementations and offers flexibility in beamforming. Proof of concept is provided using real data collected in an anechoic chamber for several pulse shapes and array weightings.     

Real-time translational control of a MEMS comb resonator

Closed-loop control has been successfully applied to a microelectromechanical systems (MEMS) lateral comb resonator device in real-time to perform impulse disturbance damping and sinusoidal position control, enabled by the use of a through-wafer optical microprobe to obtain position feedback. This result leverages the application of lifetime, in-situ control of MEMS in order to provide quality assurance of microsystems in safety critical applications. A position feedback signal produced by a through-wafer optical microprobe has been used for comb resonator system model identification by two independent methods to accurately determine the effective mass, damping, and spring constant values of the device. After accurate determination of system parameters, closed-loop impulse disturbance damping and proportional-integral-differential (PID) translational control were applied. Closed-loop control results presented indicate controllability of such microstructures and response times on the order of the natural frequency of the device.     

Experimental study of damping properties of a composite torsion bar in the helicopter main rotor hingeless hub

The results of the experimental studies of damping characteristics of a composite torsion bar in the helicopter main rotor hingeless hub are presented. A variant of their improvement is considered.     

The finite element analysis of shells of revolution with a branching meridian

We present an algorithm for calculating the shells of revolution with the branching meridian using the triangular finite elements, the rigidity matrices of which are formed based on the vector method of displacement interpolation [1]. The correct kinematic and static conditions of shell conjugation on the line of their coupling have been developed. The shell structure consisting of a cylinder and adjacent shells is calculated under various conditions of support.     

James Webb Space Telescope: Project Overview

The James Webb Space Telescope (JWST) project at the NASA, Goddard Space Flight Center (GSFC) is responsible for the development, launch, flight, and science operations for the telescope. The project is in phase B with its launch scheduled for no earlier than June 2013. The project is a partnership among NASA, the European Space Agency (ESA), and the Canadian Space Agency (CSA). The JWST mission team is fully in place, including major ESA and CSA subcontractors. This provides an overview of the planned JWST science, current architecture focusing on the instrumentation, and mission status, including technology developments, and risks.